How Paid Ads Agencies Find Clients on LinkedIn: Ad Cost Posts, Meta Ads Checks and Outreach You Approve
How paid ads agencies find clients on LinkedIn: posts about ad costs and ROAS, a Meta ads check on each company, then LinkedIn and email outreach you approve.

TL;DR: Paid ads agencies find clients on LinkedIn by finding the marketers who post and comment about rising ad costs, weak ROAS and attribution, and the people who engage with ad-industry creators and competing agencies, then checking each company for Meta ads before they write. traxy does both halves: it finds those people from LinkedIn activity and keeps only 50%+ ICP matches, then runs LinkedIn and email outreach from your own accounts that references the post or comment, after you approve it.
How do paid ads agencies find clients on LinkedIn?
Start from what marketers say on LinkedIn about paid media, not from a list of companies that advertise. A head of growth who comments "our CPMs doubled and nobody can tell me why" has told you the problem, the person and the timing, and a quick check of the company's Meta ads tells you whether the company has recorded Meta ads before you write.
That gives a paid ads agency (PPC, paid social, performance or media buying) a simple order of work:
Find the people. Marketers posting or commenting about ad costs, ROAS, attribution and creative fatigue, plus the people who engage with ad-industry creators and with agencies you compete with.
Check the fit. Keep only people who match your ideal customer profile (ICP): the right role, at a company of the right size and type.
Check the company. See whether the company has recorded Meta ads and how much website traffic it gets, so you know which pitch fits.
Research each lead. Look up the facts you want to mention, such as the offer in their ads or a recent marketing hire.
Reach out. Send a short LinkedIn and email sequence that refers to what they said, from your own accounts, after you approve it.
traxy runs your entire LinkedIn GTM end to end, from finding high intent leads from social intent to enriching and researching each one, to running relevant, personalized LinkedIn and email outreach to them on autopilot. Autopilot starts only after you approve: you test the campaign on sample leads with nothing sent and approve the launch, then it runs on its own, or you approve every message in a review queue.
traxy wrote this guide. traxy facts come from the traxy docs linked in each section. The example people, posts, searches and messages are made up to show the method. Points about how agencies sell are general guidance, not statistics.
Who hires a paid ads agency, and what do they post before they do?
The person who hires a paid ads agency is the one who owns the ad results: a founder at a small company, a head of growth or demand generation at a growing one, and a CMO or performance marketing lead at a larger one. Before they change agencies or bring one in, many of them talk about the problem in public, in their own posts and in the comments under other people's posts.
Typical topics include:
Rising costs. CPMs or cost per lead going up, a channel that stopped working, a budget that buys less than last quarter.
ROAS and results. Return on ad spend dropping, or a board asking what the ad budget returns.
Attribution. Not trusting the numbers, tracking changes, arguments between platform reports and the CRM.
Creative. Ads fatiguing quickly, needing more variations than the team can make.
Team changes. A paid media manager leaving, a new marketing leader arriving, a company starting paid social for the first time.
The agency question itself. "Anyone recommend a paid social agency?" or "In-house or agency for Google Ads?"
None of these posts means the company will hire an agency. A marketer complaining about ad costs might fix it in-house, wait it out, or only be sharing an opinion. What the post does give you is a specific, dated reason to start a conversation with someone who owns the problem you solve, which is far better than a cold list sorted by job title.
Comments are often more useful than posts. When a well-known paid media creator writes about rising costs, the comment thread fills with operators describing their own accounts in their own words. Those commenters, and the people who like the post, are the audience a paid ads agency wants to reach.
Which LinkedIn signals point to a paid ads client?
The strongest are posts and comments about ad costs, ROAS and attribution, engagement with ad-industry creators, and engagement with agencies you compete with. traxy finds people from all of these and keeps the post or comment behind each lead.
Posts and comments about ad costs, ROAS and attribution
In traxy, the Signal Brief under Targeting tells traxy which problems, topics and situations make a lead relevant: buyer pains, product mentions, triggers and keywords (Intent signals docs). For a paid ads agency, the brief might list buyer pains like "rising Meta CPMs", "falling ROAS" and "can't trust attribution", and topics like "creative fatigue" and "in-house vs agency for paid social". traxy then finds people who post, comment on or like posts about those topics.
Each lead is labeled by how strong the evidence is. Warm is a direct signal relevant to your offer, Related is contextual evidence, Activity is a weaker connection and ICP match means fit without a recorded signal of the other types. A marketer who asks for agency recommendations is Warm. Someone who liked a general post about ad trends is closer to Activity. Write to them differently.
Engagers of ad-industry creators
Pick the paid media creators your buyers follow: people who write about media buying, creative testing and attribution. In traxy, open Targeting > People, choose Track profile, paste the LinkedIn URL and tag the relationship as influencer. traxy watches that profile's posts and qualifies the people who engage (Tracking docs). Each tracked profile shows the leads it surfaced, their ICP match and the posts they came from, so you can see which creators bring in the right people.
If one post is especially relevant, say a viral thread about Meta costs, you can track that single post by URL and get the engagers who fit your ICP.
Engagers of competing agencies
Track the founders and company pages of agencies that sell what you sell, and tag them as competitors. People who keep engaging with a competing agency's posts are often in the same market and thinking about the same problems. Add a company by domain or LinkedIn company page and traxy reads that company's LinkedIn page posts for engagers who fit your ICP. Tracking a company page finds the people who engage with its posts, not its clients or every employee. There are no tracking limits on profiles, posts or company pages, so you can follow every competitor and creator that matters.
Use the Blocklist to keep your existing clients and their domains out of future discovery, so a current client who likes a competitor's post doesn't land in a cold campaign.
Social intent search
For a quick start, describe the person and the need in plain English, for example "heads of growth at B2B software companies complaining about rising Meta ad costs" or "founders asking whether to hire a paid social agency". traxy searches 71M+ scanned LinkedIn likes, posts and comments and shows the post or comment behind each match (social intent search). You can run it in the app, through trax, the traxy agent, or from Claude or ChatGPT through the traxy MCP. For more search examples for agencies, see how agencies find new clients from LinkedIn posts and comments.
Profile views and your own posts
If your team posts about paid media, the people who engage with your posts can become leads too: track your own profile. traxy also picks up profile views of the sender accounts you connect. Switch on Profile views under Targeting > Signals > LinkedIn activity, then filter Leads by "Viewed any profile" for any time or the last 7, 30 or 90 days.
How do you check the company with the Meta ads and monthly visits filters?
Open Leads, select Companies and use Check Meta ads, then filter by Running Meta ads, Active Meta ads or Monthly visits. This checks the companies behind the people you already found for recorded Meta ads and website traffic (Review companies docs). It covers Meta only.
The check is a second step, not the lead source. The people come from LinkedIn activity. The Meta ads check tells you which pitch fits each company.
Open the view. Pick a built-in or saved view in Leads, add filters (for example Warm and Related leads at software companies), then switch to Companies. People and Companies use the same audience filters.
Run Check Meta ads. Use it above the table to check the companies across the current view, use the selection action for only some companies, or check one company from its Ads tab. Checks start immediately; review the result after Checking… finishes. Recently checked companies may reuse their existing results.
Filter. Add Running Meta ads, Active Meta ads or Monthly visits when these conditions help define your audience. The People table can also show Meta ads and monthly visits as optional columns.
Read the Ads tab. A company's panel has Overview, People (the people in your view and other available people at that company) and Ads, with the recorded Meta ads and when they were checked.
Keep new companies checked. In a saved view, turn on Check new companies and traxy checks previously unchecked companies automatically, using the view's saved filters.
How a paid ads agency can use the result:
Running Meta ads: pitch an audit, creative refresh or media buying to a company that already spends on paid social.
Checked, no recorded ads: pitch a first paid social program, if that is a service you sell.
Unchecked or missing result: unknown. A missing result or an unchecked company is not the same as a company with no active ads, so check it before it goes into a "no ads yet" campaign.
Monthly visits: match the traffic level your retainer is built for, so you don't pitch a large program to a very small site.
For the full walkthrough of these checks, plus how to search the Meta Ad Library by hand, see how to find B2B companies running Meta ads. These checks are separate from the Meta Ads audience export, which builds a customer list CSV from your qualified leads to upload to Meta (LinkedIn engagers as a Meta ad audience).
How do you qualify leads at 50%+ ICP match and research each one?
Define your ICP once, and traxy scores every person on fit: only people at a 50% ICP match or higher become qualified leads. Then a campaign researches each lead for the facts you name before any message is prepared.
Set the ICP
In Lead criteria, describe the people (roles, departments, seniority, locations) and the companies (size, industry and keywords). For a paid ads agency that sells to B2B software, that might be founders, heads of growth, demand generation leads and CMOs at software companies with 20 to 200 people. You can filter leads by ICP match band to narrow the list, and mark leads Good fit or Bad fit as you review them. An ICP match is fit, not a guess at whether someone will hire you.
Check the source
Open a lead's Signals tab to see the post, comment, like or repost that put them on your list, with the source and date. Use the evidence shown there when you write. If the comment was about Google Ads, don't open with Meta.
Enrich and research
Request a work email or phone lookup for the leads you want to reach, or turn on Auto-Enrich for newly qualified leads (it doesn't backfill old ones). Then, in the campaign, describe the research you want on each lead. Useful facts for a paid ads pitch:
The offer and landing page in their current Meta ads, if the check shows ads.
Whether they are hiring a paid media or performance marketing role.
A recent product launch, new market or funding round that would change their ad plans.
Which agency or in-house setup they mention, if they mention one.
Signals outside LinkedIn, such as hiring or funding, come from this research on each lead, not from a live event feed. When a required fact isn't found, the lead stays in traxy, and in the campaign you can choose to skip it. If you only want the research, a research-only campaign records the findings without sending anything.
How does LinkedIn and email outreach that references the signal work?
Point a campaign at a shared view of your qualified leads, test it on sample leads with nothing sent, review the launch and approve it once. Then it runs, sending personalized LinkedIn and email sequences from your own connected accounts, or you approve each message in a review queue (LinkedIn outbound with traxy).
Save the audience as a shared view. For example "Warm and Related, ad cost posts, software, running Meta ads". Campaigns use shared views.
Create the campaign. In Outbound, choose Create campaign, or ask trax: "Use my shared paid ads view. Research each company's current Meta ad offer and whether they are hiring for paid media, then prepare a short LinkedIn intro and two email follow-ups based on the evidence."
Group by signal. traxy groups leads by signal and prepares a personalized message variant for each group. The marketer who commented about attribution gets a different opener from the one who engaged with a competing agency.
Test with nothing sent. Run the plan on sample leads and read the research and drafts. Check that every claim in a draft traces back to the research or the post (Create a campaign docs).
Review the launch. Before launch you see who joins, who is skipped (held by another unfinished campaign or contacted before by a completed one), the sender, the steps and the delivery mode (Review and launch docs).
Approve. Approve the campaign once and it sends on its own, or choose approval mode and approve each message in the review queue, editing any message before you approve it.
Handle replies. Replies, unsubscribes and hard bounces stop the sequence. LinkedIn and email replies land in one inbox, one conversation per lead, where you can reply or pause a lead's sequence to take over.
Sending needs connected sender accounts: your agency's own LinkedIn accounts and mailboxes. You can run several campaigns at once on different signals, for example one for ad cost commenters at companies running Meta ads, one for engagers of competing agencies, and one for founders asking about a first paid social program. You can also run the campaign from Claude or ChatGPT through the traxy MCP: draft, test, launch and reply, with a yes from you in chat before anything sends or launches.
What should the first message say?
Refer to what the person said, add one observation about their company, and ask a small question. Don't guess their budget or results, because you don't know them. These examples are made up:
Hi Dana, saw your comment under Sam's post about CPMs climbing since September. Your current Meta ads send people to a demo page with a long form. We run paid social for B2B software teams and usually start with the landing page before the ads. Worth comparing notes on what you've tried?
Hi Raj, you asked last week whether to keep Google Ads in-house or hand it to an agency. We get asked that a lot by teams your size, and the answer usually depends on who owns creative. Happy to share the checklist we use, if useful.
Keep the first message short. Save the case study and the offer for the follow-up, after they reply or accept the connection.
What are the limits: no ad spend, ROAS or non-Meta ad data?
No ad spend or ROAS. traxy's company check records Meta ads and monthly website visits. It doesn't show what a company spends on ads or what return it gets, so don't write as if you know.
Meta only. The check covers Meta ads. It doesn't show Google, LinkedIn or TikTok ad activity. If a lead talks about Google Ads, that comes from their post or your own research, not from the check.
Unchecked means unknown. A missing result or an unchecked company is not a company with no active ads.
A check reflects when it ran. The Ads tab shows when each company was checked. Ads stop and start, so recheck before a campaign if the result is old.
The check covers companies in your view. It groups the leads you already have. It is not a search of every Meta advertiser.
A post is not a decision. Someone posting about ad costs has shown interest in the problem, not a decision to hire an agency. A missing signal doesn't prove someone has no interest either.
Fit is not a promise. An ICP match and a relevant post make someone worth a message. They don't guarantee a reply or a meeting.
You approve the outreach. Nothing sends until you approve the launch, and you can approve every message. Sending follows your senders' availability, schedule and limits.
For a wider look at how agencies combine tools to find active buyers, see tools that help marketing agencies find active B2B buyers. If you also run outbound for client books, the three ways agencies use signal-based selling covers that, and traxy for agencies covers client workspaces.
FAQ
What is the best way for a PPC agency to get clients on LinkedIn?
Find the marketers already talking about the problem you solve: posts and comments about ad costs, ROAS and attribution, and engagement with paid media creators and competing agencies. Check each person's fit and company, then write about what they said. In traxy, those people become leads at a 50%+ ICP match, with the post or comment behind each one.
Does a post about rising ad costs mean the company wants an agency?
No. It means the person is thinking about the problem now. That is a good reason to start a conversation, not proof they will hire anyone. Write a message that is useful even if they never do.
Can traxy show a company's ad spend or ROAS?
No. traxy checks the companies in your view for recorded Meta ads and monthly website visits. It doesn't show ad spend, ROAS or ads on Google, LinkedIn or TikTok.
Where is Check Meta ads in traxy?
Open Leads and select Companies. Check Meta ads sits above the table. You can also check selected companies with the selection action, or one company from its Ads tab, then filter by Running Meta ads, Active Meta ads or Monthly visits (Review companies).
Should I only target companies already running Meta ads?
It depends on your offer. Audits, creative and media buying fit companies already running ads. A first paid social program fits companies that have been checked and show no recorded ads. Run both as separate campaigns with different openers.
Can I find people who engage with competing agencies?
Yes. Track the competing agency's founders as people tagged competitor, and its company page by domain. traxy qualifies the people who engage with their posts against your ICP. Tracking a company page finds engagers with its posts, not its client list.
Does traxy send the outreach for my agency?
Yes, from your agency's own connected LinkedIn accounts and mailboxes, after you approve. You test the campaign on sample leads with nothing sent, approve the launch and it runs on autopilot, or you approve every message. Replies, unsubscribes and hard bounces stop the sequence.
Can my agency run this for clients too?
Yes. An agency can resell traxy or run it as a managed service for its clients, with a separate workspace for each client. See traxy for agencies.


