Outbound

Multi-threading on LinkedIn: how to reach the buying committee at an account that's showing intent

How to multi-thread LinkedIn outbound into an account showing intent: find who engaged, pick the roles yourself and message each person without doubling up.

Multi-threading on LinkedIn: how to reach the buying committee at an account that's showing intent — traxy blog

TL;DR: To multi-thread outbound into an account that is showing intent on LinkedIn, start from the company instead of the one person who engaged: see everyone at that company who engaged or fits your ICP, pick the roles you need to reach, give each person a message built on their own signal or role, and make sure no one gets two campaigns at once. In traxy, Leads > Companies shows each account's matching people, best ICP match and latest signal, the company panel's People tab lists the people in your view and other available people at that company, and Track company adds the people who engage with that company page's posts. You choose the roles. Campaigns then research each lead and run LinkedIn and email outreach from your own connected accounts, with campaign priority and one active sequence per lead so nobody hears from you twice.

traxy runs your entire LinkedIn GTM end to end, from finding high intent leads from social intent to enriching and researching each one, to running relevant, personalized LinkedIn and email outreach to them on autopilot. On autopilot means you test a campaign on sample leads with nothing sent and approve the launch once, then it runs on its own from your connected LinkedIn accounts and mailboxes. If you would rather check everything, approve every message in a review queue instead.

We make traxy, so read this as a vendor's guide. The method (start from the account, choose roles yourself, one reason per person, one rule for overlaps) works in any outreach tool, and each section says what to do by hand. The example below is an illustration we wrote, not a customer result. Last checked: November 15, 2026, against traxy's docs for reviewing companies, managing campaigns, sequences, the MCP tools catalog and the signal cheat sheet.

How do I multi-thread outbound into an account that is showing intent on LinkedIn?

Treat the LinkedIn activity as a signal about the account, then reach two or three people there, each for their own reason, in a set order, with one owner on your side. The people who engaged hear about what they said. The other roles you pick get a short, factual message about their part of the problem.

Here is the whole workflow in traxy, step by step:

  1. Collect high intent leads. traxy finds people from social intent on LinkedIn: the posts they write, comment on and like, who views the profiles of the sender accounts you connect, and who engages with the competitors, creators, single posts and company pages you track. A person only becomes a lead with a 50% or higher ICP match, and every lead shows the post or comment behind it.

  2. Switch to the account. Open Leads and select Companies. Each row shows the company's matching people count, best ICP match, latest signal, industry, size and any available research. Accounts with more than one matching person, or a fresh signal, are where multi-threading pays off first.

  3. See who else is there. Open the company panel. Its People tab lists the people in your current view and other available people at that company. If the account matters but has little activity yet, use Track company so traxy reads its LinkedIn page posts for engagers who fit your ICP.

  4. Choose the roles. Decide which roles you need at this account, for example the person who owns the problem, the person who engaged and the person who would use what you sell. traxy shows titles, ICP match and signals. It does not tell you who the champion or the budget owner is.

  5. Build one audience per role. Filter the people, save each group as a shared lead view and tag the leads with your own role labels.

  6. Create a campaign for each audience. Each campaign researches every lead for the facts you ask for, groups leads by signal and prepares a personalized LinkedIn and email variant for each group.

  7. Rank the campaigns. Campaigns run in priority order, so a person who fits two of your role audiences goes to the first campaign they fit and is never worked by two unfinished campaigns at once.

  8. Test, review and approve. Test each campaign on sample leads with nothing sent, read the launch review, then approve. Or draft, test and launch the same campaigns from Claude or ChatGPT through the traxy MCP, which asks for your yes in chat before anything sends.

  9. Watch replies per person. Replies, unsubscribes and hard bounces stop the sequence for that lead. Other people at the same account keep going until you pause them.

That covers both halves of traxy: finding the high intent leads at the account, then the LinkedIn and email outreach to them. More on the outreach half in LinkedIn outbound with traxy.

What does multi-threading mean in LinkedIn outbound?

Multi-threading means talking to more than one person at a target account at the same time, so the deal doesn't depend on a single contact. In B2B, a purchase usually involves several people: someone who feels the problem, someone who owns the budget, someone who would run the tool and often someone who checks security or contracts. Sales teams call that group the buying committee.

LinkedIn activity is a good place to start because it shows who at an account is paying attention to the problem right now. A sales manager comments on a post about SDR ramp time. A RevOps lead likes a post about duplicate records. Neither is proof of a project, a budget or a decision, but both are reasons to look at that company more closely and to reach the people around them.

Two things make multi-threading go wrong. The first is sending the same pitch to five people at once, which reads as spam inside the company. The second is losing track of who already heard from you, so one person gets two campaigns in a week. The steps in this guide address both: each person gets their own reason, and one set of rules decides who is in which campaign.

Start from the account: engaged people and other available people in the Companies view, or Track company

Start from the Companies view when people at the account are already engaging, and use Track company when the account matters but nobody there has shown up yet.

The Companies view

In traxy, open Leads and select Companies. People and Companies use the same audience filters, so the companies you see come from the view you had open. A company row shows its matching people count, best ICP match, latest signal, industry, size and available research. Expand a row to review its people, or open the company panel (review companies).

The panel has three tabs: Overview for company information, People for people in the current view and other available people at that company, and Ads for recorded Meta ads. The People tab is where multi-threading starts. It lists the people in your current view, each of whom shows the post or comment behind them on their lead, and other available people at that company you can consider for the roles you need.

To work on several accounts at once, select the companies and choose Show their people, which returns you to the People table with a company filter. From there you can save that audience as a view.

Track company

When an account is on your target list but has no engaged people yet, use Track company from the company panel, or go to Targeting > Companies > New > Track company and add it by domain or LinkedIn company page. traxy then reads that company page's posts for engagers who fit your ICP. There are no tracking limits on profiles, posts or company pages.

Know what this does and doesn't cover. Tracking a company page finds the people who engage with that company's posts. It does not list every employee or every buyer at that company, and engagers with a company's page are often people outside it. Pair it with Tracking for the competitors, creators and industry voices the account's people follow, and with leads from company page engagers for the details.

From an AI client

The traxy MCP has the same account tools for Claude, ChatGPT, Codex, Cursor or Grok. traxy_find_company_people finds people at a company, and traxy_list_account_reports and traxy_get_account_report read account reports, which summarize accounts from your visible active leads (MCP tools). A prompt like "list my accounts sorted by lead count, then find the heads of sales at the top five" gives you a starting list to check. For how account roll-ups work, see account intelligence from LinkedIn engagement.

By hand: search LinkedIn for people at the company with the titles you need, check that their profile still lists the company as their current employer, and keep a sheet with each person, their role, their signal (if any) and the date.

Who else to reach, by role (you choose; traxy does not map the committee)

You choose who else to reach. traxy shows each person's title, ICP match and signals and can research each lead for the facts you ask for, but it doesn't read org charts, map the buying committee or label anyone as a champion or an economic buyer. Those calls come from what you know about your deals.

A simple way to pick roles for one account:

  • The person who engaged. They already care about the topic. They get a message about what they said, not about their company's buying process.

  • The owner of the problem. The title that usually decides on what you sell. If you sell an outbound program, that might be the head of sales, or the founder at a small company.

  • The person who would run it. The operator: RevOps, a team lead or the manager who would use the tool every day.

  • Optional: one more. Someone in finance, IT or security if your deals often stall there. Skip this until the account is warmer.

Your lead criteria in traxy already hold the roles, departments, seniority and locations you sell to, so use the same list. Write the roles down before you open the account, so you pick people for a reason and not because they appear in the list.

Then label them. Lead tags group audiences, so add your own tags such as "role: owner", "role: operator" or "role: engaged" and filter by them. Assign the account's leads to one teammate, and use shared notes for context, so the whole team can see who owns the account (tags, notes and assignments). The tags are your labels. traxy doesn't add them for you.

Get contact details for the people you plan to email. You can look up a work email (and a phone number for eligible leads), and Auto-Enrich can look up contact data for newly qualified leads. A lookup is not a guarantee that a usable address exists, so check the result. For more on picking the first contact, see how to find the decision maker at a company that engaged.

Research on each lead and a message per role

Give every person at the account their own reason for the message: their own signal if they have one, and a factual role-based introduction if they don't. Never tell the owner of the problem that their colleague liked a post.

traxy's guidance for writing from a signal is to read the lead's source and date before you choose an angle. When the evidence is company or role fit without a strong signal, use a factual role-based introduction, and don't invent an interaction for personalization (signal cheat sheet).

In a traxy campaign, that works like this:

  1. Describe the research. When you create a campaign under Outbound > Campaigns (or ask trax), say which facts to find for each lead, such as what the company sells, whether it is hiring for the team you help, a recent funding round or the person's time in role. The campaign researches each lead for those facts before any message is prepared. Signals outside LinkedIn, such as hiring, funding and job changes, come from this research on each lead.

  2. Decide what happens when a fact is missing. When a required research fact isn't found, the lead stays in traxy, and in the campaign you can choose to skip it.

  3. Let traxy group by signal. Leads are grouped by signal, and each group gets its own personalized message variant built on the evidence. The engager who commented on a post and the operator with no signal land in different groups with different angles.

  4. Read the drafts. Test the campaign on sample leads. A test prepares research and previews without sending anything, so you can check that each message matches the person's role and evidence.

Examples of one account, three angles:

  • Engaged (comment on a post about SDR ramp time): a message about the point they made, and one question about how their team handles it.

  • Owner of the problem (no signal): a short introduction about what you do for sales teams of their size, with one fact from the research, such as open SDR roles.

  • Operator (liked a post about CRM hygiene): a message about the work that topic creates for them.

Each message stands on its own. If two people at the account compare notes, they see two relevant messages, not one pitch copied twice. For writing from a signal in detail, see how to turn a LinkedIn signal into a message.

Run several campaigns without double messaging: campaign priority and one active sequence per lead

Run one campaign per role audience and let two rules handle overlaps: campaigns run in priority order, and a lead can be in only one active sequence at a time. Together they make sure no single person gets two campaigns at once.

  • Campaign priority. A lead goes to the first campaign it fits and stays with that campaign until it finishes. Another campaign doesn't research or message that lead in the meantime (manage campaigns). Rank the most specific campaign first, for example "engaged at target accounts" above "owners at target accounts".

  • One active sequence per lead. A lead can be in only one active sequence, including a sequence a teammate starts by hand from a lead's Message action (sequences).

  • The launch review. Before you approve, traxy shows who will join, leads excluded because another unfinished campaign holds them, people a completed campaign contacted before, the sender, the message steps and the delivery mode (review and launch).

Know where these rules stop. They work per person, not per account. Three people at the same company can be in three different campaigns at once, which is the point of multi-threading, so the pacing across an account is yours to set:

  • Stagger the launches. Launch the campaign for the people most likely to reply first, such as the engagers, and launch the role-based campaigns a few days later.

  • Choose the senders. The launch review shows the sender for each campaign, and sender accounts have their own limits, active hours and ramp-up. Decide whether the account hears from one person on your team or from two.

  • Keep one owner. Assign all of an account's leads to one teammate so one person reads every reply from that company.

For the full setup of several campaigns on one pool of leads, see how to run several LinkedIn outreach campaigns at once, and for teams with several reps, how to stop two people on your team from contacting the same lead.

Stop rules are per lead: what happens when one person replies

When one person at the account replies, traxy stops that person's sequence. It doesn't stop the sequences of other people at the same company. Replies, unsubscribe requests and hard bounces each stop active outreach for the lead they come from.

That is the right default for multi-threading, because one person saying "not me" shouldn't end the conversation with the account. It also means you decide what happens next for the rest of the account:

  • A positive reply. The conversation is moving. Pause the other leads at that company so they don't get a cold follow-up while you talk. You can pause a single lead's enrollment from their Inbox conversation, pause the sequence, which keeps each lead's position until it resumes, or pause the whole campaign. Pausing doesn't recall messages already sent.

  • A referral ("talk to Maria"). Reply yourself, then check whether Maria is already in one of your campaigns before you write to her, so she doesn't get a campaign message and a personal one.

  • "Not interested" from one person. Their sequence has stopped. Decide whether the others at the account should keep going. Often they should, with a different angle.

  • "Stop contacting us." Add the person to Do not contact under Settings, which stops outreach to that email or LinkedIn profile. If the request covers the company, pause the other leads there, add them to Do not contact as well, and use the blocklist under Settings to keep the company out of your lead results.

The Inbox keeps one conversation per lead across LinkedIn and email, so the account owner can read each person's thread in one place and take over by hand when it makes sense. Note that resuming a whole sequence does not release a lead you paused separately.

Approve each launch once, or launch from the traxy MCP

Each campaign launches only after you approve it, in the app or from your AI client. Nothing sends before that.

In the app, you test the campaign on sample leads with nothing sent, read the launch review and choose the delivery mode. In approval mode, each message waits in the campaign's review queue until you approve it, and you can edit it first. In automatic mode, the approved campaign sends on its own. For a first multi-threaded account campaign, approval mode is a good way to check that each role's message reads right before you choose automatic for the next ones.

From Claude, ChatGPT, Codex, Cursor or Grok, the traxy MCP can draft a campaign, test it, preview the launch and launch it, and manage sequences, senders and inbox replies. The AI asks for your yes in chat before anything launches or sends, and a draft or preview does not authorize sending. You can also ask trax, the agent inside traxy, to build the campaigns from one chat; anything that changes your setup shows an approval card first.

Either way, outreach goes out from your own connected sender accounts. Connect LinkedIn accounts and mailboxes under Sender accounts before you launch.

A worked example

This is an illustration we wrote, not a customer result. Say you sell an outbound program to B2B software companies with 50 to 200 people.

  1. The signal. In Leads > Companies, one account shows three matching people. A sales manager commented on a post about SDR ramp time last week, and an SDR team lead liked a competitor's post about reply rates.

  2. The roles. You decide you need the owner of the problem (the VP of Sales) and the operator (the RevOps manager). In the People tab, you find both among the other available people at the company and check their ICP match and titles.

  3. The audiences. You tag the engagers "role: engaged", the VP "role: owner" and the RevOps manager "role: operator", assign all four to one AE and save a shared view per tag.

  4. The campaigns. Campaign one, ranked first, goes to the engagers and opens with what each said. Campaign two goes to owners and operators, with research on open SDR roles and a factual role-based introduction.

  5. The launch. You test both on sample leads, read the launch reviews and approve campaign one. Four days later you approve campaign two.

  6. The reply. The sales manager replies with a question. Their sequence stops. The AE answers in the Inbox and pauses the VP's enrollment until the conversation is clearer.

What traxy does and doesn't do here

  • It does: find high intent leads from LinkedIn activity, keep only people with a 50%+ ICP match, show the post or comment behind each lead, group leads by company, show other available people at a company, track company pages for engagers who fit, find people at a company and read account reports through the MCP, research each lead in a campaign, prepare a personalized variant per signal group, keep each lead in one campaign and one active sequence at a time, and run LinkedIn and email outreach from your own connected sender accounts after you approve.

  • It doesn't: map the buying committee, read org charts or tell you who is the champion or the budget owner. Tracking a company page doesn't list every employee. A reply from one person doesn't pause the rest of the account for you.

  • Missing data means unknown. An account with one engaged person may have others who read without engaging. A contact lookup may come back empty.

  • Results vary. This guide shows the workflow. It doesn't promise replies or meetings.

FAQ

Does traxy map the buying committee for me?

No. traxy shows the people at a company with their titles, ICP match and signals, and a campaign can research each lead for the facts you ask for. You choose which roles to reach and can label them with your own lead tags.

How many people should I contact at one account?

Start with two or three: the person who engaged, the owner of the problem and the person who would run what you sell. Add more only when the account is responding. There is no fixed number that fits every deal.

If one person at the account replies, does traxy stop messaging everyone else there?

No. Stop rules are per lead: a reply, an unsubscribe or a hard bounce stops that person's sequence. Pause the other leads at the account from their Inbox conversations, or pause the campaign, when you want to hold the whole account.

Can two of my campaigns message the same person?

Not at the same time. Campaigns run in priority order, so a lead goes to the first campaign it fits and isn't worked by two unfinished campaigns at once, and a lead can be in only one active sequence. The launch review also shows people a completed campaign contacted before.

Can I find people at a target account who haven't engaged yet?

Yes. The company panel's People tab lists other available people at that company next to the ones in your view, and the traxy MCP can find people at a company. Track company adds the people who engage with that company page's posts and fit your ICP.

Can I run this from Claude or ChatGPT?

Yes. Through the traxy MCP you can read account reports, find people at a company, draft and test campaigns and launch them, with a yes in chat before anything sends.

Does multi-threading send from my own LinkedIn account?

traxy sends from the LinkedIn accounts and mailboxes you connect as sender accounts, each with its own limits, active hours and ramp-up. You can use one sender per account or split roles across teammates' senders.

Back to all articles
The right people are already out there.

Find your warmest leads.
Send them personalized messages.

From relevant interest to personalized outreach.
Put traxy to work.

7-day free trial